|
Last Modified: 11-29-2007 |
1.6 U |
|
Service Category: Vehicle Interior |
Section: Door Lock |
|
Model Year: 2008 |
Model: Sequoia |
Doc ID: RM000000TNZ01YX |
|
Title: DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: DATA LIST / ACTIVE TEST (2008 Sequoia) |
DATA LIST / ACTIVE TEST
1. READ DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body or Back Door P/W or Driver Door / Data List/
(e) Read the Data List according to the display on the Techstream.
Main Body (Main Body ECU)
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
D Door Courtesy SW
|
Driver side door courtesy light switch signal/ON or OFF
|
ON: Driver side door is OPEN
OFF: Driver side door is CLOSED
|
-
|
|
P Door Courtesy SW
|
Front passenger side door courtesy light switch signal/ON or OFF
|
ON: Front passenger side door is OPEN
OFF: Front passenger side door is CLOSED
|
-
|
|
RR Door Courtesy SW
|
Rear right door courtesy light switch signal/ON or OFF
|
ON: Rear right door is OPEN
OFF: Rear right door is CLOSED
|
-
|
|
RL Door Courtesy SW
|
Rear left door courtesy light switch signal/ON or OFF
|
ON: Rear left door is OPEN
OFF: Rear left door is CLOSED
|
-
|
|
D-Door Lock Pos SW
|
Driver side door lock position switch signal/ON or OFF
|
ON: Driver side door is unlocked
OFF: Driver side door is locked
|
-
|
|
P-Door Lock Pos SW
|
Front passenger side door lock position switch signal/ON or OFF
|
ON: Front passenger side door is unlocked
OFF: Front passenger side door is locked
|
-
|
|
RR-Door Lock Pos SW
|
Rear passenger side door lock position switch signal/ON or OFF
|
ON: Rear passenger side door is unlocked
OFF: Rear passenger side door is locked
|
-
|
|
RL-Door Lock Pos SW
|
Rear driver side door lock position switch signal/ON or OFF
|
ON: Rear driver side door is unlocked
OFF: Rear driver side door is locked
|
-
|
|
Back Door Open
|
Back door lock signal/Permit or Prohibit
|
Permit: Back door is UNLOCK
Prohibit: Back door is LOCK
|
-
|
|
Door Lock SW-Lock
|
Door control switch lock signal/ON or OFF
|
ON: Door control switch is pushed to LOCK
OFF: Door control switch is not pushed to LOCK
|
-
|
|
Door Key SW-Lock
|
Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF
|
ON: Driver side door key cylinder is turned to LOCK
OFF: Driver side door key cylinder is turned to UNLOCK
|
-
|
|
D Door Key SW-UL
|
Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF
|
ON: Driver side door key cylinder is turned to UNLOCK
OFF: Driver side door key cylinder is turned to LOCK
|
-
|
Back Door P/W (Back Door ECU)
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
Key Switch Operation Locked
|
Back door lock/unlock switch lock signal ON or OFF
|
ON: Back door key cylinder is turned to LOCK
OFF: Back door key cylinder is turned to UNLOCK
|
-
|
|
Key Switch Operation Unlocked
|
Back door lock/unlock switch unlock signal ON or OFF
|
ON: Back door key cylinder is turned to UNLOCK
OFF: Back door key cylinder is turned to LOCK
|
-
|
|
Back Door Courtesy SW
|
Back door courtesy light switch signal/ON or OFF
|
ON: Back door is OPEN
OFF: Back door is CLOSED
|
-
|
Master Switch
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
Door Lock Switch Status
|
Driver door lock switch signal ON or OFF
|
ON: Door lock switch is turned to LOCK
OFF: Door lock switch is not turned
|
-
|
|
Door Unlock Switch Status
|
Driver door unlock switch signal ON or OFF
|
ON: Door unlock switch is turned to UNLOCK
OFF: Door lock switch is not turned
|
-
|
2. PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test/
(e) Perform the Active Test according to the display on the Techstream.
Main Body (Main Body ECU)
|
Tester Display
|
Test Part
|
Control Range
|
Diagnostic Note
|
|
Door Lock
|
Door lock motor
|
LOCK/UNLOCK
|
-
|
|
D-Door Unlock
|
Driver door lock motor
|
ON/OFF
|
-
|
|
Trunk and Back-Door Open
|
Back door lock motor
|
ON/OFF
|
-
|
|